| 师伟峰 |
 |
| 电话：0755-81489958 |
|
| 传真：0755-81489955 |
|
| 详细信息 |
|
 |
|
 | 48V 16串磷酸铁锂保护板 |
|
|
|
|
| 发布日期：2009/12/9 9:37:00 |
|
| 有 效 期：3650 天 |
|
| 产品规格： |
|
| 价 格： |
 |
|
1. 介绍Introduction
LTO13SC 是力通威公司专门针对电动自行车、
UPS 等14~16 串电池包而设计的保护板方案；可适
用不同化学性质的锂电芯，如锂离子、锂聚合物、磷
酸铁锂等。
保护板预留了一个SMBUS 通讯接口，可用来设
置各种保护电压、电流等参数，灵活性很强。保护板
带载能力强，持续电流最大可达50A。
LTO13SC for a battery pack of 10~13 cells in
series is a battery protection solution of LTW’s,
which is designed for the application in Ebike、Ups.
It can be used for cells of different chemistry, for
example Li-ion, Li-Polymer, LiFePO4 and so on.
A SMBus interface is kept on the pack, which
may be used to set parameters very conveniently
such as protect voltage, protect current , etc, The
pack can support a load with very large current, in
addition that the continuous current may be up to
30A.
2. 特点Features
10~13 节电芯串联保护Provides protection for
10~13 cells in series
充电和放电的各种保护功能Provides
protections in charging and discharging
电芯的智能平衡处理，平衡电流可通过外部器件
灵活调整 Processes the balance between cells
smartly, the current of it can be set freely by
external components.
充放电过程中有相应的温度保护 Provides
respective temperature protection in charging
and discharging
硬件的过流、短路保护功能处理Deals with
over-current and short-circuit protection with
circuit itself
所有的保护延时均可编程设置 All protection
delay time can be programmed
多种工作模式可灵活控制静态电流的消耗
Provides a few modes so that the power
consume can be controlled smartly.
睡眠模式Provides sleep mode
4~5 颗LED 的电压模式电量显示功能Drives
4-5 seg LED indicates for remaining capacity
based on battery’s voltage.
1颗充电LED 指示功能Provides one LED for
charging indication.（本PCBM 无引出）
保护状态LED 闪烁指示功能Flashes the LED
while protection is active.
标准的SMBUS 接口Standerd SMBus interface. |
| |
温馨提示： 为保障您的利益，建议优先选择VIP会员 信息；
没有找到您需要的产品信息？发布您的供求信息，让客户主动找上您！ |
|
|
|
